|Drawing Speed:||P||Drive Type:||P|
|Chain:||Heavy Duty Bent Chain||Drawing Length:||9m Or As Required|
|Voltage:||380V Or As Required||Condition:||Brand New|
50mm Cold Drawing Machine,
12m/min Cold Drawing Machine,
50mm pipe drawing machine
20 Ton Chain Type Cold Drawing Mahine for Copper Tube Carbon Steel Pipe
Cold drawing machine is the main processing equipment of cold drawing steel tube, it is used for drawing black and non-ferrous metal bar material at normal temperature and the secondary processing of the hollow tube after hot rolling and extrusion. It is the main processing equipment for the production of small caliber, precision, thin wall and high mechanical properties pipe.
II. Structure of Cold Drawing Machine
The drawn trolley is supported by two I-shaped rails and driven by chain via gear reducer and motor. The chain and the drawn car can be fixed to the small car body axial direction by an adsutable split piston.
When drawing, first, put the core rod into the inner hole of the pipe, then, install the mandrel, and then push out the front end of the steel pipe with the mandrel. Start the pre-tightening cylinder, make the die clamp the steel pipe, the drawing trolley is in the starting position, and the chain starts to draw.
III. Main Parameter of 20 Ton Cold Drawing Bench
Max. drawing force 20T
Max. drawing length 9M
Drawing speed: 12M/min
Max. drawing billet Φ50
Drawing center height 800mm
Main drive 55Kw-4P
Main gear reducer JZQ850
Main chain 6” Heavy duty bend chain
Return motor 3kw, transducer
Returning transmission Chain
Returning speed 60m/min.
IV. Cold Drawing Process
Pipe (bar) head pointing -- Cold drawing -- Cutting end
Contact Person: Joanna