Payment & Shipping Terms:
|Drawing Length:||O||Drawing Speed:||0 ~ 25 M/min （adjustable)|
|Drawing Quantity:||1 ~ 3pcs At One Time||Voltage:||380V (or As Request)|
|Frequency:||50 HZ (or As Request)||Condition:||Brand New|
60 ton Metal Drawing Machine,
3 line metal drawing machine,
metal pipe drawing machine
60 Ton Chain Type Metal Drawing Machine To Draw 1 To 3 Pieces Of Steel Pipes One Time
I. Definition of cold drawing
Drawing is a metalworking process which used tensile forces to stretch metal. As the metal is drawn, it stretches thinner, into a desired shape and thickness. For tube drawing, the starting stock is drawn through a die to reduce its diameter and increase its length. Drawing is usually done at room temperature, thus classified a cold working process.
II. Advantages of double chain three line cold drawing machine
1. Drawing car and main drive chain are fixed setting, this structure avoid loud noise from chain hit the bed body.
2. The center height of die and transmission almost at the same level, it reduces the tremble phenomenon of main chain when it moving and has advantage of improve drawing stability.
3. Adopts bowl spherical mould sleeve, different die can be adjusted separately, convenient to adjust straightness of each work piece at time of multi drawing.
4. Electric control system has friendly interface, the data of drawing force, working speed, work piece length etc. is shown in it.
III. Main parameters of double chain three line cold drawing bench machine
|1.Effective drawing length(m)||13|
|2.Max. length of raw material(m)||9|
|3.Drawing speed(m/min)||0 - 20|
|4.Number of drawing (pcs/time)||1 ~ 3|
|6.1 Motor type||Z4-315-22|
|6.2 Motor power(KW)||250|
|7.1Pitch of chain(mm)||250|
|7.2Size of chain plate(mm)||22×160×440|
Note: 1. Drawing diameter is depend on drawing material, drwing pieces at one time, wall thickness etc.
2. Send your detail requirements, we will special design for you!
Contact Person: Joanna