Payment & Shipping Terms:
|Qty. Of Rollers:||P||Material Of Rollers:||P|
|Precision:||0.15 ~ 0.2mm/m||Speed:||Adjustable|
|Voltage:||380V Or As Required||Straightening Material:||Stainless Steel, Carbon Steel, Copper, Aluminum Etc.|
Two Roll Straightening Machine,
0.2mm/m wire straightening machine,
High Straightness Steel Rod Straightening Machine
Two - Roll Steel Wire Straightening Machine For 8 ~ 20mm Stainless Steel Rod
I. Working principle of two roll straightening machine
Two-roll straightening machine usually used to straight high yield strength and small bending metal bars and rods and achieve high straightness and good surface roughness.
The straightening effect of this straightening machine is whole-course, so the two-roll straightener not only has high straightening quality, but also eliminates the bending of the end of the round material. The two-roll straightener also has polishing effect. It is widely used in machinery manufacturing, metallurgy, instrument and meter industry.
II. Main parameter of YJ-20 two roll straightening machine
|1||Straightening material||Carbon steel, stainless steel etc.|
|2||Straightening diameter (mm)||8 ~ 20mm round bar|
|3||Max. yield strength (Mpa)||δs≤420|
|4||Straightening length (mm)||250 ~ 1000|
|5||Straightening speed (m/min.)||5 ~ 30m/min. (spped adjustable)|
|6||Roller arrangement type||2 roll, up and down arranged|
|7||Permitted bend before straightening (mm/m)||＜3|
|8||Straightening precision (mm/m)||0.15 ~ 0.2|
|9||Throat diameter of roller (mm)||180 (material: Cr12MoV, HRC:58~60, 2pcs)|
|10||Guide plate||MC nylon|
Note: Other types if you need, please send us your detail requirement, we will special design for you!
III. Straightened material
Not only round stainless steel bars but also aluminum bars, copper bars, brass bars, low carbon steel bars, alloy steel bars, titanium bars can be straightened on the machine.
IV. Advantages of two roll steel wire straightening machine
1. High straightening precision: 0.15 ~ 0.2mm/m;
2. The bending of the round steel end is eliminated by straightening the whole circumference direction;
3. The surface has a polishing effect.
Contact Person: Joanna