Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
SUZHOU SENBO MACHINERY CO., LTD
Home ProductsTube Pointing Machine

Pointing Rolling Machine For Metal Alloy Steel Pipe & Bar

China SUZHOU SENBO MACHINERY CO., LTD certification
I'm Online Chat Now

Pointing Rolling Machine For Metal Alloy Steel Pipe & Bar

Pointing Rolling Machine For Metal Alloy Steel Pipe & Bar

Large Image :  Pointing Rolling Machine For Metal Alloy Steel Pipe & Bar

Product Details:
Place of Origin: CHINA
Certification: ISO9001
Payment & Shipping Terms:
Minimum Order Quantity: 1set
Price: Negociate
Packaging Details: Palletizing or sea worthy packing
Delivery Time: 5~8 weeks
Payment Terms: T/T, L/C
Supply Ability: 20 sets/month
Detailed Product Description
Name: P Roller Material: P
Rollers: P Rolling Material: Carbon Stee, Stainless Steel, Brass, Copper Etc.
Rolled Head: P Voltage: 380V Or As Required
Frequency: 50HZ Or As Required Condition: Brand New
High Light:

200mm Tube Pointing Machine

,

GCR15 Tube Pointing Machine

,

200mm bar pointing machine

Single Head Pointing Rolling Machine for Metal Alloy Steel Pipe and Bar

 

I. Technical parameter

 

Item Description Data
1 Pointing specification 30-50mm
2 Diameter of roller 220mm
3 Width of roller 500mm
4 Material of roller Gcr15
5 Quantity of roller 2 Pairs
6 Type of gear reducer JZQ650
7 Main motor 4-30KW
8

Overall size of main machine(L×W×H)(mm)

 

3200×1700×1600

 

II. Structure feature and advantages

  • Simple structure;

  • Simple structure;

  • Easy control;

  • Fit for small and medium size metal rod and pipe;

  • Low cost and long service time.

 

III. Operation and maintenance

1. Before use, check the upper and lower roll groove, must be aligned.

2. Lubricate the drive part regularly.

3. After starting the motor, the roll direction should be checked, and the raw material end should be fed into the roll according to the direction shown on the mechanism transmission schematic diagram. Do not send in the opposite direction to prevent accidents.

4. When working, the rolling material appears flash burr, should pull the tightening screw, proper pressure on the upper roll, adjust the gap between the upper and lower roll.

5. Check fasteners and seals regularly to prevent looseness and oil leakage.

6. When the machine is stuck or appears abnormal sound, stops immediately to find out the cause and repair it.

7. Regular maintenance, removal of scale, cleaning gear, bearing, etc., timely replacement of damaged or worn parts.

 

IV. Other types and main parameter

 

Type GQ81 GQ115 GQ120 GQ130 GQ140 GQ150 GQ156 GQ176 GQ184 GQ192 GQ220 GQ250
Dia. of roll segments (mm) 81 115 120 130 140 150 156 176 184 192 220 250
Length of roll segments (mm) 140 280 250 290 250 290 250 390 350 430 440 560
Number of roll grooves 10 15 12 13 10 9 7 12 10 8 7 7
Max. inlet diameter (mm) 8 14 16 20 22 26 28 36 40 46 52 58
Min. outlet diameter (mm) 2 3 5 6 8 10 12 16 20 28 36 42
Angle of sizing segments (°) ≥110
Rolling speed (rpm) 45 36 36 30 30 25 25 25 25 25 20 20
Material yield strength (Mpa) ≤400
Equipped motor Type Y100L-4 Y112M-4 Y132S-4 Y132M-4 Y160M-4 Y160L-4 Y180M-4 Y200L2-4 YE2-225S-4
Power (kw) 2.2 4 5.5 7.5 11 15 18.5 22 37
Speed (rpm) 1420 1440 1440 1440 1460 1460 1470 970 1475
Equipped gear reducer Type JZQ200 JZQ250 JZQ350 JZQ400 JZQ500 JZQ650 JZQ750
GR 31.5 40.17 48.57 23.34

 

V. Photos of cold drawn pipe and bar heading machine

 

Pointing Rolling Machine For Metal Alloy Steel Pipe & Bar 0

Contact Details
SUZHOU SENBO MACHINERY CO., LTD

Contact Person: Joanna

Tel: 86-13862222117

Send your inquiry directly to us (0 / 3000)